Pipe handling equipment is needed for oil rigs, oil platforms, and oil refineries. You need gear that can move the massive pipes that make this industry go, and you need something that will be reliable for many years to come. It should be chosen for the place where your pipes will be installed, and you may have these devices custom-made for your company when needed.

Why Do You Need Special Equipment?

Pipe handling equipment is used to move large pipes from place to another, to tip up these pipes for a large construction project, or to replace pipes in the system. You can purchase from a large range of gear, and you should work with someone who will let you know how to use each piece of equipment to your advantage.

Which Items Are You Buying?

You are choosing from:

  • Power catwalk
  • Bridge crane racker
  • Vertical racker
  • X-Y racker
  • Tubular vertical to horizontal
  • Stinger

This list helps you understand what you are buying for these things, and you must ensure that you have chosen a device that works best in your situation. There are many situations that you can use each of these devices, and they are explained below.

What Is A Power Catwalk?

A power catwalk is any device that will move the pipes safely from one place to another. In most instances, you are moving pipes to the drill press floor, and you need to know that you can install the catwalk safely. When you buy a power catwalk, you need to find something that is long enough for your facility. Some people have issues with the length of their catwalk because they do not know how long the catwalks are. You can order a catwalk that seems to be the right size for you, or you might choose a catwalk that is custom-made for your facility. When you can get your pipes to the drill press floor safely, you can do much better work.

Bridge Crane Racker

The bridge crane racker has a special clamp that will easily move your pipes from the outside of the drilling area to the center. You get a special safety pin that will help you lock in the pipe, and you should use the bridge crane ranker in tight spaces where you are moving pipes in and out. You can move to the center of the drilling area, but you can also move pipes away from the center of the drilling area.

Vertical Crane Racker

The vertical crane racker uses a mechanical arm to move items up and down in the drilling area. You often need to add pipe as you are drilling, and you can set up the vertical racker to move these items into the drilling area. Most people who are setting up their drilling system need to automate this device so that they can keep the operator free from distraction.

The vertical crane racker has a mechanical arm and safety pin. The mechanical arm will attach to a new pipe quickly move into the drilling area, and add the pipe. You do not need to worry about safely with these devices because they are set up to avoid damage if there is a collision in the drilling area.

The vertical trolley will move up and down the drilling area to quickly put all your pipes in the right place. If you have any questions about how to set up the trolley and arm, you may need to order a custom device. A custom device that you have purchased will fit your rig, help you move at the right pace, and work with the pipes that you use every day.

X-Y Racker

The X-Y racker allows you to set up pipe movement when the rest of the system is offline. The racker is Installed above the derrick, and it has a mechanical arm that can bring pipes into place or move them out of place. This racket is useful when you are moving excess pipe when the system is offline, or you could start feeding the system for testing. If you are buying an X-Y racker, you need to find an operator who can manage this device for you while other vices in the system are doing most of the work.

The X-Y racker supports other items in the site, such as the catwalk and bridge crane racker. You can move pipe in and out of the area with no trouble, and you should ensure that you have found a racker that is the right size for your facility. If you are using an X-Y racker, you can move faster when trying to feed pipe into the drilling area. However, there are some systems that will not work very well when you are using the X-Y racker. Make sure that you can fit this item into your system because they do not always fit.

Tubular Vertical to Horizontal

Drill pipes, collars, and casing can be moved in and out of the drilling area without any trouble at all if you have chosen to use the THV. The THV can move some of these smaller items out of the area and away from the area at the same time. Someone who would like to make their system more efficient should use just this device to get items in and out of the drilling area. If you are using a vertical crane racker, you can feed that racker with this device. However, you need to see if you can fit one of these rockers into your system. Not all oil production system can use a THV.


The Stinger is a fast and automated device that can be used to build up pipes and racks while you are in the process of drilling. You can use the robotic arms to build up any part of the system that you like, and you should use the Stinger when you want to increase production. Someone who is designing a system needs to check the size of the Stinger they have bought, find catwalks and rackets that will work with the Stinger, and ensure that the Stinger is powered properly.

Read And Order Online

You can read and order online easily. There is a lot of information on these devices that you need to see before you make a purchase. Plus, you need to ensure that your items have been ordered for the best price. You can get something that is much cheaper than normal if you are shopping for the right items. No one using all these items at the same time to manage their pipe and drilling area. In stead, you need to choose the devices that best suit your situation.

You can compare prices when you are shopping online, and you need to ensure that you have chosen something that you know you an operate on your own. Someone who is new to buying this equipment might need to write up their entire design before making one of these major purchases.


The pipe equipment that you install in your oil refinery or rig should be used to ensure that you have the very workflow, safety standards, and products. You need to get something that you can automate, and you need to choose devices that make your machines more efficient. You can check out these items online, order them quickly, and start upgrading your drilling system.

Where To Get Custom Equipment

You can try the pipe handling equipment you have found at Entro Industries, or you might want to order custom equipment that is useful for your staff as they work on oil rigs and in refineries.

Entro Industries
3601 NE John Olsen Avenue
Hillsboro, OR 97124
(503) 356-8888

Custom Pipe Handling Rigs

While the majority of rigging firms would love to have the capability to design and manufacture their equipment on-site, this often isn’t feasible, which also extends to other companies that require heavy machinery. This means that they’ll need to outsource the process to another firm, which can often be located hundreds, if not thousands of miles away. This naturally requires the hiring of a heavy machinery transport company. Though many firms will have to rely on them extensively to operate effectively moving forward, they many often not know what to look for when hiring one, which is especially true for newer organizations.

While many people may believe that hiring a heavy machinery transport company may be similar to finding any other form of delivery company, there are some obvious differences. These can often make the decision making process much more overwhelming, which is further compounded by a lack of awareness in what to look for when making a choice. Because of how vital the decision can be to your operations, being informed about what to look for before you hire a firm is mandatory.

This means that you’ll need to do an extensive amount of research before contacting any transportation company, which will then help to narrow your choices. After this, it can be crucial to speak with representatives of each company to get an overall sense of how they operate, as well as how much it may cost to hire them. Outside of price, however, many people may not realize what they should consider and ask about during this process. While you may have a few specific things that you’ll want to discuss already, there should be a few areas that you should look at during the hiring process that you may not have thought about.

heavy equipment moving

Logistics of Heavy Equipment Moving

Logistics is perhaps the first thing that many rigging companies will think about, there are more factors to this than you may have thought about. This is primarily because there can be quite a difference between moving one or two pieces of machinery and delivering all of the equipment that you might need to begin operations. You’ll first need to consider the number of parts that you’ll need to have transported and how large each of these are, which is something that becomes increasingly more complex with every piece of machinery that you add.

This means that you’ll need to pay a significant amount of attention to the firm’s logistics, as it can have a domino effect on a few other areas. For example, if a transportation company only can move have of your parts at a time, then the process will take twice as long to complete compared to a firm that can move everything at once. This means that your plant will experience much more downtime, which will naturally affect your overall production and profits.

While you shouldn’t want to rush the process, for various reasons, transporting your parts also shouldn’t take longer than necessary. Speaking with the company about their logistics can help you get a general idea of how long the delivery will take.

What capabilities they have also plays a large part in this, regardless of how large their fleet is. This is primarily because different trucks and other vehicles can carry various load sizes and weights. While the majority of firms will be able to handle a substantial amount of weight, they do have their limits, which is something that you’ll need to be informed about before you hire them. This can be quite a simple part of the process, although it’s not something that should be overlooked. As such, you should know how heavy each of your machine parts are and whether or not the transportation company will be able to carry such a load.

Experienced Moving Companies

After logistics, how experienced a heavy machinery transportation company is can be one of the more prominent factors that you should look at during the decision making process. Naturally, this is because more experienced firms will be much more capable at transporting your parts than relatively new ones. However, this doesn’t mean that younger firms should automatically be ruled out; instead, you should look at the overall experience of their workforce, as they’ll be better adept at lifting and moving machinery.

This means that they’ll be less likely to make any mistakes during the transportation process, which should put your mind at ease when you’re hiring them. There can be quite a significant amount of time and training needed for someone to become skilled enough to properly transport heavy machinery, which is something that can be vital to look for when making a decision. After all, even a simple mistake can end up being costly for you, both in terms of the finances needed to repair the equipment and the downtime that will be required to do so.

When you’re researching a firm, it can be vital to find reviews from their previous clients, which can provide a significant amount of insight into the quality of their service. This is something that can be tied directly into how experienced the firm is, as the better-skilled employees are means that they’ll have better reviews; because of that, you’ll be able to base part of your decision on what these past customers are saying.

Licensing & Insurance

Licensing and insurance are perhaps the first things that you should look at when choosing a heavy machinery transport company. This is primarily because it lends a significant amount of trust onto them before you’ve even had a chance to speak to them. The majority of states require each of these companies to undergo a significant amount of procedures before they become certified to do business, which also extends to each of their employees.

This means that the more certificates they have, the more adept they will be at doing their job, which should help to put your mind at ease. Should they only have the basic certificates, then you may want to opt for a different company that has more, as it means that they’ll be able to offer much more security.

Insurance also plays a considerable part in this, as it helps to cover the cost of any accidents that may occur. While these rarely happen, they can be quite costly if they do happen, which is something that the majority of us will want to avoid. Insurance will cover the cost of this, although this can depend significantly on what kind of coverage they have, as well as how large their policy is. This means that you’ll need to speak with the firm about the level of their insurance policy to ensure that you’ll be covered if any mistakes happen.

Safety Rating & Carefulness

When dealing with any moving company, especially with heavy machinery, safety is paramount. This means that you’ll need to pay a significant amount of attention to the safety rating of any company that you may hire. There are a few areas that you’ll need to consider here, with the safety and security of the equipment you’re purchasing being one of the more prominent. However, that doesn’t mean that it’s the only area that you’ll need to look at, as the safety of their employees is also paramount.

This means that you’ll need to assess any safety measures that they have in place for their employees. While many of us will know the obvious examples of proper gear and attire, they should have a variety of procedures in place to guarantee safety. The more extensive these measures are, the better, as they ensure that there shouldn’t be any accidents during the manufacturing and delivery of the machinery that you’re having created and transported.

This should also extend to how careful each of the company’s workers is, which is primarily driven by the fact that much of the equipment you’re having transported can be quite sensitive. This means that any small mistake can have a prominent effect on how well this equipment operates once it’s installed. After all, if parts of your rigging equipment are off by even one degree, then it could completely disrupt your operations. Adding in how expensive the parts may be means that they can often be too valuable to have damaged en-route. While insurance may cover the cost of fixing or replacing the equipment, this could often mean stalling your operations, which will have a high financial cost.

Professional Equipment Movers

Formed in 1994, Entro Incorporated holds a considerable amount of experience in engineering and manufacturing to both commercial and API quality requirements. Each of the company’s products are designed and created in an API 4F certified facility. This history, combined with the company’s passion for the industry, ensures that each of the products that it designs are to a high standard and manufactured to customer specifications and requirements.

Aside from its manufacturing expertise, Entro Incorporated holds a significant amount of experience in the field services niche, helping to securely and efficiently assist with rig moves and set up. This also includes project management, field surveys, machining, and training, among others.

Entro Industries
3601 NE John Olsen Avenue
Hillsboro, OR 97124
(503) 356-8888

Heavy Equipment Moving Company

Heavy Haul Trailer

A heavy haul trailer is not a generic device that carries heavy things from one place to another. These trailers are custom-designed to carry everything from machines to drilling components, and even rockets. These trailers may carry a home that will lifted from its foundation, and the trailers are designed with a weight rating that matches the hauling job you have coming up. Read more about building a heavy haul trailer that works in all situations.

1. What Are You Hauling With The Trailer?

Every heavy hauling trailer must be designed to hold the thing that you have built. If the device you have built has a particular shape or contour, the trailer should be made to fit that particular shape. If your device is very long, you need a longer trailer. The trailer itself much give you enough ground clearance to account for the weight you will put on the unit, and you need tires that are strong enough to hold up the thing you are hauling.

2. When Do You Need It?

A heavy haul trailer should be built in advance of the haul because most of those trailers take some time to construct. You want to get the highest quality trailer that you can, and it is much easier for you to do that when you order early and give your builder updates. Imagine how complex these trailers can be and remember that they must be just as complex as the machines that you build.

3. Who Will Be Hauling It?

The person who is hauling the trailer plays a big part in your purchasing decision. The company that hauls the trailer uses a certain kind of truck, or you might have a truck that you plan on using. While most trailer hutches are the same, you can get something custom-made for your truck that will be easier to haul, safer, and easier to hitch to your truck.

You may have issues with the way your devices need to be hauled because you must use a bigger/slower truck. If that is the case, you need a trailer that will work in low range situations at slower speeds.

4. How Do You Attach Your Device?

This is the most important part of the process because you need to know how you will attach the device to the trailer, how the standard freight strap will work, or how you will roll you device onto the trailer.

You may derive some peace of mind from having a ramp on the back that folds up and holds your device in place. You may want more options for using freight straps that will help you keep your items in place. It is often wise for you to ask the builder to show you how they would attach your device to the trailer, and you can make adjustments during the build process.

heavy haul trailer tires

5. Tires

Tires are more important than you think. You will be tasked with replacing the tires after they are worn down, and you need to know how much they cost, how to install them, and how much weight they can bear. Your builder will let you know which tires to use, and you can make adjustments to the design if you are concerned about maintenance costs.

Adding tires to a trailer design may be helpful if you are supporting a lot of weight. Someone who is in the process of building a new trailer will often find that they need more traction if they are driving into poor weather conditions, or you may need more traction for hill climbs with your trailer.

At the same time, you need to have an idea of how to maintain your tires. The trailer builder will let you know how much air should be in each tire so that the driver can check the tires during a long drive. You may move the same machine over and over, and you can create a simple guide for your drivers to use while they are on the road.

6. Materials

Steel should be used to build the trailer for your next heavy haul, but you do not want your trailer to be so heavy that your trucks cannot manage the weight of both the trailer and the machines/items they are hauling. Because of this, you need to be very specific about the total weight of both the trailer and the unit to be hauled. When you have worked with a builder, they can let you know how to trim weight in the design while maintaining the structural integrity of the trailer.

7. Powder coating

Powder coating is the preferred technology of today, and it will keep the trailer in very good condition while avoiding rust, preventing any peeling of the paint, and providing a finish that is appealing. Your trailer needs to do the job right, but that trailer loses value if the paint is chipping or peeling. When you see rust on your device, you will notice that the structural integrity of the trailer drops. This is dangerous, and you should never send a driver on the road who has to deal with a rusting or cracking trailer.

Powder coating can be applied every year if you would like to keep the trailer in spotless condition, and you must ensure that the powder coating has been applied by a professional who understands how the trailer was built. This simple bit of service will prevent rust while maintaining the beautiful exertion of the trailer.

8. The Suspension

The air ride suspension on your trailer is the most important part of the build. You need a suspension that will clean up all the bumps on the road, and that suspension should be strong enough to manage the weight that you have put on the trailer. These trailers are difficult to control because your driver cannot swerve around bumps or cracks in the road. Your driver cannot drive so slow that they do not make any progress, and the driver should not be concerned every time they get near a bump in the road.

The suspension requires regular service because it goes through a lot of wear and tear during the course of a year. Ask your builder to give you instruction on suspension service, checks, and inspections. When you are servicing the travel, you will feel much better knowing that you can easily service the travel for everyone’s safety.

9. Bridge Clearance

Bridge clearance is a very serious concern when you are driving with a large unit over a distance of several hundred miles. While your builder cannot guarantee that you will fit under every bridge you find, you can get a lowboy trailer that is so low to the ground that you get a few extra inches of clearance as you drive. Ask your buildings if they can get you some more clearance, and remember to measure your items carefully before getting on the road.

10. Width

The width of your trailer plays a large part in how you travel with it. Most trailers are going to be very wide, but that does not mean that they will fit onto all the roads where you are traveling. Because of this, you need to check the width of all the roads you will use, the width of the items you will be carrying, and the width of bridge passes. There are certain places that are very narrow, and you need to be aware of this when ordering your travel. In fact, you may find that you need to change your entire design to accommodate the tunnels or underpasses where you will be traveling.

Conclusion on Trailers

The heavy haul trailer that you are using for your next big project should be chosen with great care. You need to know that your trailer can travel safely, carry any machine that you have built, and can be maintained with relative ease. Your company is investing millions in the large machines and components that need to be transported, and you should be just as careful with your heavy haul trailer. The trailer must have a great suspension, a custom design, and the proper wheels/tires. You can build a better trailer using the most advanced steel, and you can have a ramp built in that will help you drive the device onto the trailer when needed.

To find out more about these trailers or having one custom built for your needs, contact us:

Entro Industries
3601 NE John Olsen Avenue
Hillsboro, OR 97124
(503) 356-8888

Heavy Haul Trailer